HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 35
aliAdd, Synopsis, Availability, Description, Operands, Examples
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
aliAdd Adds a member to a zone alias. Synopsis aliadd "aliName", "member; member" Availability admin NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to add one or more members to an existing zone alias. The alias member list cannot contain another zone alias. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following required operands: "aliName" "member" Specify the name of a zone alias, in quotation marks. Specify a member or list of members to be added to the alias, in quotation marks, separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port area number pair. View the area numbers for ports using the switchShow command. • WWN • QuickLoop AL_PAs Examples To add members to zone aliases array1, array2, and loop1: switch:admin> aliadd "array1", "1,2" switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51" switch:admin> aliadd "loop1", "4,5[0x02]; 6,7[0xEF]" Fabric OS 5.x command reference guide 35