HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 412

perfClearEEMonitor Clears statistics counters of an end-to-end performance monitors. Synopsis perfcleareemonitor [slotnumber/]portnumber [monitorId] Availability admin NOTE: This command requires a Performance Monitor license. This command is deprecated; use perfMonitorClear instead. Description Use this command to clear statistics counters for all end-to-end performance monitors on a port, or an end-to-end monitor associated with a specific monitorId. Issuing portStatsClear on a port also results in all end-to-end monitors clearing. Operands This command has the following operands: slotnumber portnumber monitorId For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specify the monitor number to clear. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are cleared. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To clear statistics counters for an end-to-end monitor: switch:admin> perfcleareemonitor 1/2 5 End-to-End monitor number 5 counters are cleared switch:admin> perfcleareemonitor 1/2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y 412 Fabric OS commands