HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 480

portLogDumpPort Displays the port log of specified port, without page breaks. Synopsis portlogdumpport portid Availability all users Description Use this command to display the port log of specified port. The command displays all entries in the log without any page breaks. It is identical to portLogShowPort, except that portLogShowPort prompts the user to press Enter between each page. Port logs are circular log files in the switch firmware, which can save up to 8,192 entries. See portLogConfigShow to display the current port log size. Once the log is full, the newest log entries delete the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device-to-device1, and control information If the port log is disabled, the following message displays as the first line. See portLogClear command for more information. WARNING: port log is disabled See the HP StorageWorks Fabric OS 5.x procedures user guide for more information. Operands This command has the following operand: portid Specify the area number of port to display. If a port area number is specified, all other ports on the switch are ignored. This operand is optional. Examples To display the port log dump for a port: switch:user> portLogDumpPort 14 time task event port cmd args 08:35:27.899 tShell pstate 14 OL1 08:35:27.899 tReceive pstate 14 LR2 08:35:27.916 tReceive pstate 14 AC 08:35:28.416 interrupt scn 14 1 08:35:28.433 tFabric ioctl 14 90 101d9910,0 08:35:28.433 tFabric Tx 14 164 02fffffd,00fffffd,0005ffff,10000000 08:35:28.433 tReceive Rx 14 0 c0fffffd,00fffffd,00050006 08:35:28.433 tReceive Rx 14 164 03fffffd,00fffffd,00050006,02000000 08:35:28.433 tTransmit Tx 14 0 c0fffffd,00fffffd,00050006 (continued on next page) 480 Fabric OS commands