HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 149

diagModeShow Displays diagnostic mode configuration. Synopsis diagmodeshow Availability all users Description Use this command to display the current settings for several diagnostic configuration parameters. This command is most often used by burn-in scripts to display a summary of the configuration settings that were in effect when the script was run. NOTE: Any automated use of this command should rely only on the names of the specific variables, not on their exact positions in the output. Earlier versions of this command listed diag.mode.burnin.nExec instead of Burnin nExec and listed diag.mode.burnin.nExec instead of Burnin passnum. Operands none Examples To display the diagnostic mode: switch:admin> diagModeShow diag.mode* parameters saved in flash: diag.mode.burnin = 0 diag.mode.burnin.level = 0 diag.mode.burnin.firstPowerUp = Thu Feb 28 01:36:12 2002 diag.mode.esd = 0 diag.mode.gbic = 0 diag.mode.splb = 0 diag.mode.lab = 0 diag.mode.mfg = 0 diag.mode.bplb = 0 diag.ports = TEST (type=INDEX, sz=512): 100. Burnin passnum = 1 Burnin nExec = 0 Silkworm Mode = OFF Disable Modes Print = OFF Fabric OS 5.x command reference guide 149