HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 87

cfgEnable Enables a zone configuration. Synopsis cfgenable "cfgName" Availability admin NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to enable a zone configuration. The specified zone configuration is built by checking for undefined zone names, zone alias names, or other inconsistencies by expanding zone aliases, removing duplicate entries, and then installing the current configuration. If the build fails, the previous state is preserved (zoning remains disabled, or the previous configuration remains in effect). If the build succeeds, the new configuration replaces the previous configuration. See the cfgShow command for a description of defined and current configurations. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operand: cfgName Specify the name of a zone configuration to enable, in quotation marks. This operand is required. Examples To enable the zone configuration "USA_cfg": switch:admin> cfgenable "USA_cfg" You are about to enable a new zoning configuration. This action will replace the old zoning configuration with the current configuration selected. Do you want to enable 'USA_cfg' configuration (yes, y, no, n): [no] y zone config "USA_cfg" is in effect Updating flash ... See also cfgClear cfgDisable cfgSave cfgShow Fabric OS 5.x command reference guide 87