HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 273

fwPortDetailShow Displays the port information for specified user ports. Synopsis fwportdetailshow [--p portNumber] | [--s portState] Availability all users NOTE: This command requires a Fabric Watch license. Description Use this command to print the overall status of the ports specified. The overall status is calculated based on the following contributors: Port Errors LFA Number of link loss occurrences exceeded limit for time period LSY Number of sync loss occurrences exceeded limit for time period LSI Number of signal loss occurrences exceeded limit for time period PER Number of protocol errors exceeded limit for time period INW Number of invalid words exceeded limit for time period CRC Number of invalid CRC errors exceeded limit for time period PSC Port hardware state changed too often BLP Buffer limit port SFP Errors STM SFP temperature is out of specification SRX SFP receive power is out of specification STX SFP transmit power is out of specification SCU SFP current is out of specification SVO SFP voltage is out of specification The overall status can be in one of the followings: Healthy Every contributor is healthy Marginal One or more contributors are in this status Faulty Faulty hardware Offline Port has no connectivity or is disabled If the overall status is not healthy, the contributing factors also are listed. Operands If no operand is specified, all ports are displayed. This command has the following operands: --p portNumber Yields a port detail report for a specific port. Fabric OS 5.x command reference guide 273