HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 421

perfMonitorClear Clears counters of end-to-end, filter-based, and ISL performance monitors on a port. Synopsis perfmonitorclear --class monitor_class [slotnumber/]portnumber [monitorId] Availability admin Description Use this command to clear counters for performance monitors on a port, specified by class. Monitor classes include end-to-end monitors (EE), filter-based monitors (FLT), and inter-switch link monitors (ISL). Issuing the portStatsClear command on a port clears all end-to-end and filter-based monitors (but not ISL monitors) for all the ports in the same quad. Operands This operands are as follows: --class monitor_class slotnumber portnumber monitorId The monitor class, which can be one of EE (end-to-end), FLT (filter-based), or ISL (inter-switch link). These values are case sensitive. This operand is required. For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specifies the monitor number to clear. Monitor numbers are defined are created, and can be displayed using perfMonitorShow. This operand is optional; if omitted, this command clears all monitor counters of the appropriate monitor_class on the port. This operand does not apply to ISL monitors. Examples To clear statistics counters for an end-to-end monitor: switch:admin> perfMonitorClear --class EE 1/2 5 End-to-End monitor number 5 counters are cleared switch:admin> perfMonitorClear --class EE 1/2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y Fabric OS 5.x command reference guide 421