HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 789

7 supportShow reference This chapter explains the information displayed by the supportShow command. This chapter has the following sections: • supportShow control commands, page 789 • supportShow command groups, page 789 • Proc entry information displayed, page 792 supportShow control commands The supportShow command is used to display support information by executing groups of preselected Fabric OS and Linux commands. The information displayed by the supportShow command can be controlled by a set of control commands: supportShowCfgShow supportShowCfgEnable supportShowCfgDisable Display which groups of commands are enabled to display under supportShow. Enable a group of commands to display under supportShow. Disable a group of commands from displaying under supportShow. supportShow command groups Table 30 displays the command groups under supportshow, and which Fabric OS or Linux commands are executed by that group. NOTE: Many of the commands executed by supportShow are intended for support use only. These commands are not intended for end users. Table 30 supportShow command groups Command group Fabric OS 3.2.0 os mqshow i memShow mallocshow fastcheckheap exception faultshow traceshow errDump Fabric OS 4.4.0 mii-tool -vv /usr/bin/du -xh / | /bin/sort: /bin/ps -elfh /bin/echo /bin/rpm -qa /bin/cat /var/log/dmesg /bin/cat /etc/fstab /bin/cat /etc/mtab printing proc entries. errdump -a/-p Fabric OS 5.x command reference guide 789