HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 33

Trap recipient severity level The event trap level in conjunction with the event's severity level. When an event occurs and if its severity level is at or below the set value, the SNMP trap, swEventTrap, is sent to configured trap recipients. By default, this value is set to 0, implying that no swEventTrap is sent. Possible values are: 0 none 1 critical 2 error 3 warning 4 informational 5 debug See errShow for related information. The ACL check is as follows: there are six ACLs to restrict SNMP get/set/trap operations to hosts under a host-subnet-area. Host-subnet-area is defined by comparing nonzero IP octets. For example, an ACL of 192.168.64.0 enables access by any hosts that start with the specified octets. The connecting host is enabled to set each host-subnet-area to be read-write or read-only. The highest privilege matched out of six entries is given to the access. The ACL check is turned off when all six entries contain 0.0.0.0. NOTE: When secure mode is enabled, the access control list feature is incorporated into the WSNMP and RSNMP security policies. Community strings can be changed on the primary FCS switch only and will propagate changes across the fabric. Operands none Examples switch:admin> agtcfgshow Current SNMP Agent Configuration Customizable MIB-II system variables: sysDescr = FC Switch sysLocation = End User Premise sysContact = Field Support. authTraps = 1 (ON) SNMPv1 community and trap recipient configuration: Community 1: Secret C0de (rw) Trap recipient: 192.168.1.51 Trap recipient Severity level: 4 Community 2: OrigEquipMfr (rw) Trap recipient: 192.168.1.26 Trap recipient Severity level: 0 Community 3: private (rw) No trap recipient configured yet (continued on next page) Fabric OS 5.x command reference guide 33