HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 22

aaaConfig Manages RADIUS configuration information. Synopsis aaaconfig [action] [options] Availability admin Description Use this command to manage the RADIUS configuration for the authentication, authorization, and accounting (AAA) services. This command displays, adds, removes, changes, enables, or disables RADIUS configuration. When the command completes, any new configuration is saved persistently. It is effective for the next AAA request. The configuration applies to all switch instances in a platform supporting multiple switch domains. Use the centralized RADIUS servers to manage AAA services for a switch, as defined in RFC 2865. NOTE: This command can be executed when you are logged in through the console, or a serial or SSH connection. Operands The command takes as input an action and its associated options. Without any specified action, the command displays the usage. Specify action as one of following: --show --add server [options] --remove server --change server [options] --move server to_position --radius [on | off] --switchdb [on | off] Displays the current AAA service configuration. Adds a RADIUS server to the configuration. Removes a RADIUS server from the configuration. Changes a RADIUS server configuration. Moves a RADIUS server from the current position to a new position. When server is a required operand for an action, it must be either an IP address or a name in dot notation. If a name is used, DNS must be properly configured. Turns on or off the current RADIUS configuration. Turns on or off the switch local database as secondary authentication. The following are the options for the --add and --change actions: -p port -s secret -t timeout -a [pap | chap] RADIUS server port number Common secret between the switch and RADIUS server Response timeout for the RADIUS server Use PAP or CHAP as authentication protocol 22 Fabric OS commands