HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 669
supportFtp, Clears FTP parameters.
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 669 highlights
supportFtp Sets, clears, or displays support FTP parameters, or a time interval to check the FTP server. Synopsis supportftp [-S] supportftp -s [-h hostip] [-u username] [-p password] [-d remotedirectory] supportftp -t hours supportftp -R Availability admin Description Use this command to set, clear, or display support FTP parameters or a time interval to check the FTP server. NOTE: If there is no parameter specified, this command defaults to supportFtp -S. Operands This command has the following mutually exclusive operands: --S Displays FTP parameters. --s Sets the FTP parameters. -s has the following optional operands: h hostip Specifies the FTP host IP address. It must be an IP address. hostip should be less than 48 characters. -u username Specifies the FTP user name. username should be less than 48 characters. -p password Specifies the FTP user password. If the user name is anonymous, the password is not needed. password should be less than 48 characters. -d remotedirectory Specifies the remote directory in which to store trace dump files. supportFtp cannot take a slash ( / ) as a directory name. remotedirectory should be less than 48 characters. --t Sets the time interval at which to check the FTP server. -t has the following required operands: hours Checks the connectivity of the FTP server at the indicated time interval (in hours). -R Clears FTP parameters. Fabric OS 5.x command reference guide 669