HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 418

perfDelFilterMonitor Deletes one or all filter-based performance monitors from a port. Synopsis perfdelfiltermonitor [slotnumber/]portnumber [monitorid] Availability admin NOTE: This command requires a Performance Monitor license. Description Use this command to delete a filter-based performance monitor from a port, or all such monitors associated with a port. Operands This command has the following operands: slotnumber portnumber monitorid For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specify the monitor number to delete. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are deleted. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To delete filter monitor 4 from a port, and then all filter monitors from the port: switch:admin> perfdelfiltermonitor 2/3 4 The specified filter-based monitor is deleted. switch:admin> perfdelfiltermonitor 2/3 This will remove ALL monitors on port 19, continue? (yes, y, no, n): [no] y See also perfAddUserMonitor perfShowFilterMonitor 418 Fabric OS commands