HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 463
ISL R_RDY Mode mode, VC Link Init mode
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 463 highlights
portCfgShow Displays port configuration settings. Synopsis portcfgshow [slotnumber/][portnumber] Availability all users Description Use this command to display the current configuration of all ports. If no operand is specified, all the port configuration settings are displayed for that switch or for the Core Switch 2/64 logical switch. The following configuration information appears: Speed mode Trunk Port mode Long Distance mode VC Link Init mode (virtual channel) Locked L_Port mode Locked G_Port mode Disabled E_Port mode Mcast LoopBack mode ISL R_RDY Mode mode RSCN Suppression Persistent Disable mode Displays as 1G, 2G, or AN (when in auto speed negotiation mode). This value is set by the portCfgSpeed command. Displays as ON when port is set for trunking or blank (..) when trunking is disabled on the port. This value is set by the portCfgTrunkPort command. Displays as blank (..) when the mode is off, L1 when the link is up to 50 km, or L2 when the link is up to 100 km, and also supports LE, L0.5, and LD modes. This value is set by the portCfgLongDistance command. Displays as blank (..) when the long-distance link initialization option is turned off and (ON) when it is turned on for long distance mode. This value is set by the portCfgLongDistance command. Displays as ON when port is locked to L_Port only or blank (..) when L_Port lock mode is disabled (and it behaves as a U_Port). This value is set by the portCfgLPort command. Displays as ON when port is locked to G_Port only or blank (..) when G_Port lock mode is disabled (and it behaves as a U_Port). This value is set by the portCfgGPort command. Displays as ON when port is not allowed to be an E_Port or blank (..) when the port is allowed to function as an E_Port. This value is set by the portCfgEPort command. Displays as blank (..) when mcast loopback mode is off, and (ON) when mcast loopback mode is enabled. This value is set by the portCfgMcastLoopback command. Displays as ON when the port has been R_RDY-mode enabled or blank (..) when the port is allowed to function as an E_Port. This value is set by the portCfgISLMode command. Displays as ON when the port has RSCN suppression enabled or blank (..) when the port has RSCN suppression disabled. This value is set by the portCfg rscnsupr command. Displays as ON when the port is disabled across reboots or power cycles or blank (..) when the port is allowed to function normally. This value is set by the portCfgPersistentDisable command. Fabric OS 5.x command reference guide 463