HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 672

Examples To save RASLOG, TRACE, and supportShow information to an FTP server in non-interactive mode: switch:admin> supportsave -n -u admin -p pass -h 192.168.1.1 -d tmp Saving support information for module RASLOG... ...ortSave_files/switch-S5-200405200010-errDumpAll.ss: 566.47 B/s 1.66 kB Saving support information for module TRACE... ...ortSave_files/switch-S5-200405200010-tracedump.dmp: 10.00 MB 848.00 kB/s Saving support information for module SUPPORTSHOW... ...rtSave_files/switch-S5-200405200014-supportShow.ss: 346.39 kB/s 1.11 MB To save RASLOG, TRACE, and supportShow information to an FTP server in interactive mode on a dual-CP system: switch:admin> supportsave This command will collect RASLOG, TRACE, supportShow and other support information and then transfer them to a FTP server. Only the local CP's information will be saved and supportShow information is only available on the Active CP. This operation can take several minutes. OK to proceed? (yes, y, no, n): [no] y Host IP: 192.168.1.1 User Name: admin Password: Remote Directory: tmp Saving support information for module RASLOG... ...ortSave_files/switch-S5-200405200010-errDumpAll.ss: 566.47 B/s 1.66 kB Saving support information for module TRACE... ...ortSave_files/switch-S5-200405200010-tracedump.dmp: 10.00 MB 848.00 kB/s Saving support information for module SUPPORTSHOW... ...pportSave_files/switch-S5-200405200014-supportShow: 346.39 kB/s 1.11 MB See also supportFtp 672 Fabric OS commands