HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 691

switchShow Displays switch and port status. Synopsis switchshow [-portcount] Availability all users Description Use this command to display switch and port status information. Information might vary by switch model. Switch summary information; it is followed by a section covering summary information by port: switchName switchType switchState switchMode switchRole switchDomain switchId switchWwn switchBeacon bladeBeacon Displays the switch symbolic name. Displays the switch model number. Displays the switch state: online, offline, testing, or faulty. Displays the switch mode: native or interop. Displays the switch role: principal, subordinate, or disabled. Displays the switch domain ID: 0 to 31 or 1 to 239. Displays the switch embedded port D_ID. Displays the switch world wide name (WWN). Displays the switch beaconing state (on or off). Displays the blade beaconing state (on or off). The switch summary is followed by one line per port: Area Slot Port Media Type Speed Part of the 24-bit port ID, which consists of domain, area number, and optional AL_PA. Slot number; slots numbered from 1 to 4 and 7 to 10. Port number; ports are numbered from 0 to 15 or 0 to 31. Media type: dash (--) sw lw cu id Speed of the port: no module present shortwave laser longwave laser copper serial I 1/8G 1/4G 1/2G 1G 2G N1 N2 4G AN UN 25 Mbit/sec 250 Mbit/sec 500 Mbit/sec 1Gb/s fixed transfer speed 2 Gb/s fixed transfer speed 1 Gb/s negotiated transfer speed 2 Gb/s negotiated transfer speed 4 Gb/s negotiated transfer speed Auto negotiating Unknown Fabric OS 5.x command reference guide 691