HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 750

zoneAdd Adds a member to the zone. Synopsis zoneadd "zoneName", "member;member" Availability admin NOTE: This command requires HP Advanced Zoning license, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to add one or more members to an existing zone. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: zoneName member Specify the name of an existing zone, in quotation marks. This operand is required. Specify a member or list of members to be added, in quotation marks, separated by semicolons. Valid values can be one or more of the following: A switch domain and port area number pair; for example, 2, 20. View the area numbers for ports using the switchShow command. Node or port WWN. QuickLoop AL_PA. Zone alias name. Examples To add aliases for three disk arrays to Blue_zone: switch:admin> zoneadd "Blue_Zone", "array3; array4; array5" See also zoneCreate zoneDelete zoneRemove zoneShow 750 Fabric OS commands