HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 180
Port received an ELP RJT, Port is the EMT Initiator
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Flags Port flags: 0x00000001 0x00000002 0x00000004 0x00000008 0x00000010 0x00000020 0x00000040 0x00000080 0x00000200 0x00000800 0x00001000 0x00002000 0x00004000 0x00008000 0x00010000 0x00020000 0x00040000 0x00080000 0x00100000 0x00200000 0x00400000 0x00800000 0x01000000 0x02000000 0x040000000 0x080000000 0x100000000 0x200000000 Slave connection Loopback connection Incompatible connection Overlapping domains Overlapping zones Done PTIO ioctl Sent an RJT to ELP BF received from the port Segmented by routing code Zoning has completed Segmented by Platform Management Segmented due to no license Segmented due to E_Port disabling DIA already sent for that port RDI already sent Port is true T port Port received an ELP Port received an ELP RJT LR pending due to ELP RJT rcv Received a DIA on this port Port is the EMT Initiator Security violation Security incompatibility Rcv a DIA ACC Port is security authenticating ECP RJT or retires exceeded Segmented due to duplicated WWN Segmented due to E_Port isolation nbrWWN Neighboring switch's WWN nbrPort Neighboring switch's port lr_tid Link reset timer identifier and current state. red_ports All E_Ports that are connected to the same neighboring switch Operands This command has the following operands: slotnumber portnumber For bladed systems only, specifies the slot number of the port to display, followed by a slash (/). Specifies the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. 180 Fabric OS commands
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/180.png)