HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 79

cfgAdd Adds a member to a zone configuration. Synopsis cfgadd "cfgName", "member; member" Availability admin NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to add one or more members to an existing zone. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become in effect, an appropriate zone configuration must be enabled using the cfgEnable command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following required operands: cfgName member Specifies a name for the zone configuration, in quotation marks. Specifies a zone member or list of zone members to be added to the configuration, in quotation marks and separated by semicolons. Members can be specified in one or more of the following ways: • Zone names • QuickLoop names • FA (Fabric Assist) zone names Examples To add two new zones to the configuration "Test_cfg": switch:admin> cfgadd "Test_cfg", "redzone; bluezone" See also cfgClear cfgCreate cfgDelete cfgDisable cfgEnable Fabric OS 5.x command reference guide 79