HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 762

zoneRemove Removes a member from a zone. Synopsis zoneremove "zonename", "member;member" Availability admin NOTE: This command requires HP Advanced Zoning license, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to remove one or more members from an existing zone. The member list is located by an exact string match; therefore, it is important to maintain the order when removing multiple members. For example, if a zone contains array2; array3; array4, removing array3; array4 succeeds but removing array4; array3 fails. If all members are removed, the zone is deleted. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: zoneName member Specify the name of an existing zone, in quotation marks. This operand is required. Specify a member or list of members to be added, in quotation marks, separated by semicolons. Valid values can be one or more of the following: • A switch domain and port area number pair; for example, 2, 20. View the area numbers for ports using the switchShow command. • Node or port WWN. • QuickLoop AL_PA. • Zone alias name. 762 Fabric OS commands