HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 467

portCfgTrunkPort Configures a port to be enabled or disabled for HP ISL Trunking license. Synopsis portcfgtrunkport [slotnumber/]portnumber mode Availability admin NOTE: This command requires a ISL Trunking license. Description Use this command to enable or disable a port for trunking. NOTE: You can disable or enable trunking using the portCfgTrunkPort or switchCfgTrunk commands. When the command is executed to update the trunking configuration, the ports for which the configuration applies are disabled and reenabled with the new trunk configuration. As a result, the traffic through these ports might be disrupted for a period of time. Operands This command has the following operands: slotnumber portnumber mode For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Specify 1 to enable this port for trunking. Specify 0 to disable this port for trunking. This operand is required. Examples To enable a port for trunking: switch:admin> portcfgtrunkport 1/3 0 See also portCfgShow portShow switchCfgTrunk switchShow Fabric OS 5.x command reference guide 467