HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 478

portLogDump Displays the port log without page breaks. Synopsis portlogdump [count[, saved[, portid]]] Availability all users Description Use this command to display the port log, listing all entries in the log without page breaks. This command displays the same information as portLogShow, but portLogShow prompts the user to press Enter between each page. If the port log is disabled, the following message displays as the first line. See portLogClear command for more information. WARNING: port log is disabled For a full explanation of the information displayed by this command, see the HP StorageWorks Fabric OS 5.x procedures user guide. Operands This command has the following operands: count saved portid Specify the maximum number of lines to be displayed. Only the most recent count entries are displayed. This operand is optional. Specify a nonzero value to display the saved port log from the last switch fault. See upTime for conditions that cause a fault. The operand count is ignored when displaying the saved log. This operand is optional. Specify the port to display. All other ports will not be displayed. This operand is optional. Examples To display the port log for a port: switch:user> portLogDump 20 time task event port cmd args 08:35:27.899 tShell pstate 14 OL1 08:35:27.899 tReceive pstate 14 LR2 08:35:27.916 tReceive pstate 14 AC 08:35:28.416 interrupt scn 14 1 08:35:28.433 tFabric ioctl 14 90 101d9910,0 08:35:28.433 tFabric Tx 14 164 02fffffd,00fffffd,0005ffff,10000000 08:35:28.433 tReceive Rx 14 0 c0fffffd,00fffffd,00050006 08:35:28.433 tReceive Rx 14 164 03fffffd,00fffffd,00050006,02000000 08:35:28.433 tTransmit Tx 14 0 c0fffffd,00fffffd,00050006 08:35:28.433 tFabric ioctl 14 91 103646d8,0 (continued on next page) 478 Fabric OS commands