HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 521
portSwap
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 521 highlights
portSwap Swaps area numbers of two ports. Synopsis portswap [slotnumber1/]portnumber1 [slotnumber2/]portnumber2 Availability admin Description Use this command to swap area numbers for a pair of ports. Both ports must be disabled prior to executing this command and the port-swapping feature must be enabled using portSwapEnable. NOTE: To undo a previous port swap, execute portSwap again on the same two ports. portSwap information is kept in its own database; it cannot be manipulated by editing the configuration database displayed by configShow and configUpload. Operands This command has the following operands: slotnumber1 portnumber1 slotnumber2 portnumber2 For bladed systems only, specify the slot number of the first port whose area number is to be swapped, followed by a slash (/). Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. For bladed systems only, specify the slot number of the second port whose area number is to be swapped, followed by a slash (/). Specify a port number to be configured, relative to its slot for bladed systems. Examples To swaps area numbers between a pair of ports: switch:admin> portswap 1/e 2/5 portswap done Fabric OS 5.x command reference guide 521
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/521.png)