HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 289

haShow Displays control processor (CP) status. Synopsis hashow Availability all users Description Use this command to display control processor status, which includes: • Local CP state (slot number and CP ID) • Remote CP state (slot number and CP ID) • High Availability enabled/disabled • Heartbeat up/down • Health of standby CP: Healthy Failed Unknown The standby CP is running and the background health diagnostic has not detected any errors. The standby CP is running, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate repair action. Failover is disabled until the standby CP is repaired. The standby CP healthy state is unknown due to not existing, heartbeat is down, or healthy monitor detects a configuration file error. • HA synchronization status: HA State Synchronized HA State Not In Sync The system is currently fully synchronized. If a failover became necessary, it would be nondisruptive. The system is unable to synchronize the two CPs, due to the standby CP being faulty or another system error. If a failover became necessary, at this time, the standby CP reboots, and the failover is disruptive. NOTE: This command might not be supported on nonbladed systems. Operands none Fabric OS 5.x command reference guide 289