HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 250

Operands This command has the following optional operands: -nframes count -ports itemlist -seed payload_pattern -width pattern_width -size pattern_size Specify the number of times (or number of frames per port) to execute this test. If count is omitted, the default of 10 is used. Specify the ports to test. If itemlist is omitted, the test is executed on all online F_Ports in the specified slot. Specify the pattern of the test packets payload. Valid values are: 0 CSPAT (default) 1 BYTE_LFST 2 CHALF_SQ 3 QUAD_NOT 4 CQRT_SQ 5 CRPAT 6 RANDOM Specify the width of the pattern. Valid values are: 1 byte 2 word 4 quad Specify the number of words in the test packet payload. If pattern_size is omitted, the default value is 512. Examples To run fportTest on a switch: switch:admin> fporttest -ports 1/0-1/15 Running fPortTest ....... Test Complete: "fporttest" Pass 10 of 10 Duration 0 hr, 0 min & 1 sec (0:0:0:127). passed. Diagnostics The following are possible error messages if failures are detected: DATA INIT PORT_DIED EPI1_STATUS_ERR ERR_STAT ERR_STATS ERR_STATS_2LONG ERR_STATS_BADEOF ERR_STATS_BADOS ERR_STATS_C3DISC ERR_STATS_CRC ERR_STATS_ENCIN ERR_STATS_ENCOUT ERR_STATS_TRUNC ERR_STAT_2LONG ERR_STAT_BADEOF 250 Fabric OS commands