HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 81

cfgClear Clears all zone configurations. Synopsis cfgclear Availability admin NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to clear all zone information in the transaction buffer. All defined zone objects in the transaction buffer are deleted. If an attempt is made to commit the empty transaction buffer while a zone configuration is enabled, you are warned to first disable the enabled zone configuration or to provide a valid configuration with the same name. After clearing the transaction buffer using the cfgClear command, use the cfgDisable command to commit the transaction and then disable and clear the zone configuration in flash memory for all the switches in the fabric. If no current zoning configuration exists, use the cfgSave command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands none Examples To clear all zones and then clear flash memory: switch:admin> cfgclear The Clear All action will clear all Aliases, Zones, FA Zones and configurations in the Defined configuration. Do you really want to clear all configurations? (yes, y, no, n): [no] n switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] n Fabric OS 5.x command reference guide 81