HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 616

setDbg Sets debug level of the specified module. Synopsis setdbg [module_name] [level] Availability admin Description Use this command to set the debug level of a specified module. NOTE: High debug level values can generate a large volume of messages, degrading the system response time. Operands This command has the following operands: module_name level Specify the name of the module for which you want to view the debug and verbosity levels. Module names are case sensitive. This operand is optional; if omitted, this command displays the debug and verbose level for all modules. Specify the debug level for the specified module (0 to 9). A 0 value (default) specifies that no messages are to display. Higher values cause more messages from that module to display. This operand is optional, if omitted, this command displays the current debug and verbose level of the specified module. Examples To set debug level of module named NS to value 3: switch:admin> setdbg NS 3 switch:admin> dbgshow NS Module NS, debug level = 3, verbose level = 0 See also dbgShow 616 Fabric OS commands