HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 123

configure Modifies system configuration parameters. Synopsis configure Availability admin Description Use this command to change the following system configuration parameters: • Switch fabric settings • Virtual channel settings • Zoning operation parameters • RSCN transmission mode • Arbitrated loop parameters • System services • Portlog events settings • Application attributes NOTE: If executed on an enabled switch, only the application attribute can be configured. To access all parameters controlled by this command, you must disable the switch using the switchDisable command. The configure command is navigated using a series of menus. Top-level and associated submenus consist of a text prompt, a list of acceptable values, and a default value (in brackets). Use the following options to control input: Return Interrupt (Ctrl-C) End-of-file (Ctrl-D) When entered at a prompt with no preceding input, accepts the default value (if applicable) and moves to the next prompt. Aborts the command immediately and ignores all changes made. This keystroke is common on many computers but can be different on your system. When entered at a prompt with no preceding input, terminates the command and saves changes made. This keystroke is common on many computers but might be different on your system. Switch fabric settings There are several settings that control the overall behavior and operation of the fabric. Some of these, such as the domain, are assigned automatically by the fabric and might differ from one switch to another in the fabric. Other parameters, such as the BB credit, can be changed for specific applications or operating environments but must be in agreement among all switches to allow formation of the fabric. Fabric OS 5.x command reference guide 123