HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 202

faZoneAdd Adds a member to a Fabric Assist zone. Synopsis fazoneadd "fazoneName","member; member" Availability admin Description Use this command to add one or more members to an existing Fabric Assist zone. This command does not change the defined configuration (which you can view using the agtCfgShow command). For the change to become effective, an appropriate Fabric Assist zone configuration must be enabled using the cfgEnable command. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following required operands: fazoneName member Specify the name of the Fabric Assist zone, in quotation marks. Specify a list of Fabric Assist zone members. The whole list must be enclosed in quotation marks and members separated by semicolons. A member can be specified by one or more of the following methods: • Enter a fabric domain and area number pair (for example, "1,2"). View the area numbers for ports using the switchShow command. • WWNs (for example, "10:49:00:00:00:20:3f:2e"). See faZoneCreate for more details on the use of WWNs in Fabric Assist zones. • Fabric Assist zone alias names. • Exactly one Fabric Assist host member (for example, "H{1,2}"). Examples To add aliases for some disk arrays to "Blue_fazone": switch:admin> fazoneadd "Blue_fazone", "array3; array4; array5" To add a Fabric Assist host member to "Blue_fazone": switch:admin> fazoneadd "Blue_fazone", "H{5,6}" 202 Fabric OS commands