HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 692

Port State comment Port state information No_Card No interface card present. No_Module No module (SFP or other) present. Mod_Val Module validation in process.Mod_Inv - nvalid module. No_Light Module not receiving light. No_Sync Module receiving light but out of sync. In_Sync Module receiving light and in sync. Laser_Flt Module signaling a laser fault. Port_Flt Port marked faulty. Diag_Flt Port failed diagnostics. Lock_Ref Locking to the reference signal. Testing Running diagnostics. Online Port is up and running. The comment field is blank, or displays: Disabled Port is disabled. Bypassed Port is bypassed (loop only). Loopback Port is in loopback mode. E_Port Fabric port; displays WWN and name of attached switch. F_Port Point-to-point port; displays WWN of attached N_Port. G_Port Point-to-point but not yet E_Port or F_Port. L_Port Loop port; displays number of NL_Ports. (Trunk master) (upstream) (downstream) Port is the master port in a group of trunking ports. (Trunk port, master is port #x) - Port is configured as a trunking port; the master port is port number x. E_Port is an upstream path towards the principal switch of the fabric. E_Port is a downstream path away from the principal switch of the fabric. Persistently Disabled This port has been disabled using portCfgPersistentDisable. FICON - Persistent DID This port has been disabled since the switch could not obtain its configuration domain ID during the fabric reconfiguration when FICON mode was enabled. See ficonShow for more information. If a port is configured as a long distance port, the long distance level is displayed in the format of Lx, which represents the long distance level number. See portCfgLongDistance for more information 692 Fabric OS commands