HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 784
Command, Description, Displays serial ID SFP information.
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 784 highlights
Table 28 switchAdmin commands (continued) Command Description qloopAdd Adds a member to a QuickLoop. qloopCreate Creates a QuickLoop. qloopDelete Deletes a QuickLoop. qloopRemove Removes a member from a QuickLoop. qloopShow Displays QuickLoop information. quietMode Sets or clears the telnet session quiet mode, or displays the current mode. reboot Reboots either one control processor (CP) or the entire system. routeHelp Displays a list of FSPF-related commands. saveCore Saves or removes core files created by daemons. secHelp Displays information about security commands. sensorShow Displays sensor readings. setDbg Sets debug level of the specified module. setEsdMode Enables or disables ESD mode. setGbicMode Enables or disables media mode. setMediaMode Enables or disables media mode. setModem Enables or disables modem dial-in to a control processor (CP). setSfpMode Enables or disables media mode. setVerbose Specifies module verbose level. sfpShow Displays serial ID SFP information. shellFlowControlDisable Disables XON/XOFF flow control on the console serial ports. shellFlowControlEnable Enables XON/XOFF flow control on the console serial ports. slotOn Enables a blade slot. slotPowerOff Removes power from a slot. slotPowerOn Restores power to a slot. slotShow Displays the status of all slots in the system. snmpConfig Manages the SNMP agent configuration. snmpMibCapSet Modifies options for configuring SNMP MIB trap capability. 784 MUA-based roles
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/784.png)