HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 319

• In the case of conflicting settings within a single item list, an error is generated, as described earlier. In the case of multiple item list parameters, the last one on the command line overrides previous settings. The exact type of list varies, depending on the test and the parameter; however, the most common are blade ports and user ports. A list of blade ports is most commonly used by ASIC-level tests such as cmiTest or turboRamTest and represents which ports on the current blade (specified with --slot # parameter) are tested. A list of user ports is used by the higher-level tests, such as spinSilk or crossPortTest, to specify which user-accessible external ports within the current switch (selected during telnet login) are tested. When specified in an item list, user ports might be specified by either the area portion of the ports Fibre Channel address or with slot/port notation. For nonblade systems, the port number on the silkscreen is the area number, so the two notations are identical. The exact type of list required for any input parameter might be determined with the diagCommandShow command. For item list parameters, the parameter type is PT_LIST and the list type is one of those shown in Table 15. Table 15 Object descriptions Type Grouping Description BPORTS UPORTS QUADS CHIPS MINIS SLOTS INDEX Operands none Examples none See also backport camTest centralMemoryTest cmemRetentionTest cmiTest crossPortTest diagCommandShow portLoopbackTest portRegTest Blade Switch Blade Blade Blade Chassis n.a. Blade ports, internal and external ports User ports, ports with external connections Quadrants, group of (normally four) ports Chips, ASICs within a blade Mini-switches Slots Anything Fabric OS 5.x command reference guide 319