HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 461

portCfgPersistentEnable Enables a port persistently. Synopsis portcfgpersistentenable [slotnumber/]portnumber Availability admin Description Use this command to persistently enable a port. Persistently enabled ports remain enabled across power cycles, switch reboots, and switch enables. By default, a port is enabled persistently. The change in configuration is effective immediately. A persistent port enable reenables all previously set port configurations of that port. A persistently enabled port can temporarily be disabled by the portDisable or switchDisable command. The switchDisable command will also disable the persistently enabled ports of that switch. The persistent switch disable or enable configuration does not alter the persistent disable or enable configurations of the ports within the switch. The configuration commands configDefault and portCfgDefault do not modify the persistent enable attribute of a port. Operands This command has the following operands: slotnumber portnumber For bladed systems only, specify the slot number of the port to configure, followed by a slash (/). Specify a port number to configure, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, this command displays the persistently enabled condition for all ports. When no operand is specified, the command reports the current port persistently enabled status for all ports in the switch. The value of YES is displayed for ports that are persistently enabled. Examples To configure a port as persistently enabled and then display all ports that are persistently enabled: switch:admin> portcfgpersistentenable 9/3 switch:admin> portcfgpersistentenable Slot 9 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Enabled YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES (output truncated) Fabric OS 5.x command reference guide 461