HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 442

portCamShow Displays port-based filter CAM utilization. Synopsis portcamshow [slotnumber/][portnumber] Availability all users Description Use this command to display the current filter CAM utilization of all ports or one port specified at input. The following information is displayed: SID used DID used SID entries DID entries SID free DID free Total number of CAM entries used by this port. Note that each CAM entry (either SID or DID CAM) can be shared among ports in the same quad. Total number of CAM entries used by this port. Note that each CAM entry (either SID or DID CAM) can be shared among ports in the same quad. All existing source ID entries within the CAM per quad. Note that each CAM entry (either SID or DID CAM) can be shared among ports in the same quad. All existing destination ID entries within the CAM per quad. Note that each CAM entry (either SID or DID CAM) can be among ports in the same quad. Total number of free SID CAM entries per quad. Total number of free DID CAM entries per quad. Operands This command has the following operands: slotnumber portnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, information for all ports is displayed. 442 Fabric OS commands