HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 635
slotShow, Blade Type
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 635 highlights
slotShow Displays the status of all slots in the system. Synopsis slotshow Availability all users Description Use this command to inventory and display the current status of each slot in the system. The fields and their possible values are as follows: Slot Blade Type Displays the physical slot number. Displays the blade type: • SW BLADE-The blade is a switch. • CP BLADE-The blade is a control processor. ID Status • UNKNOWN-Blade not present or its type is not recognized Displays the hardware ID of the blade type. Displays the status of the blade: • VACANT-The slot is empty. • INSERTED, NOT POWERED ON-The blade is present in the slot but is turned off. • DIAG RUNNING POST1-The blade is present, powered on, and running the POST (power-on self-test). • DIAG RUNNING POST2-The blade is present, powered on, and running the POST (power-on self-test). • ENABLED-The blade is on but the external ports are disabled using bladeDisable. • DISABLED-The blade is powered on but disabled. • FAULTY-The blade is faulty because an error was detected. • UNKNOWN-The blade is inserted but its state cannot be determined. Operands none Fabric OS 5.x command reference guide 635
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/635.png)