HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 583

The following policy types require members be specified by WWN address: • FCS_POLICY • SES_POLICY (HP does not support SES_POLICY) • MS_POLICY • SERIAL_POLICY • FRONTPANEL_POLICY • SCC_POLICY These policy types require members be specified as WWN strings, domain IDs, or switch names. If domain ID, or switch names are used, the switches associated must be present in the fabric or the command fails. DCC_POLICY Members The DCC_POLICY_nnn is a list of devices associated with a specific switch and port combination. An empty DCC_POLICY does not stop access to the switch. The device is specified with a WWN string. The switch and port combination must be in the following format: switch port switch can be specified using WWN, domain, or switch name. port can be specified by port numbers separated by commas and enclosed in either brackets or parenthesis: for example, (2, 4, 6). Ports enclosed in brackets will include the devices currently attached to those ports. The following examples illustrate several ways to specify the port values: (1-6) Selects ports 1 through 6. (*) Selects all ports on the switch. [3, 9] Selects ports 3 and 9 and all devices attached to those ports. [1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those ports. [*] Selects all ports on the switch and devices currently attached to those ports. OPTIONS_POLICY members NoNodeWWNZoning is the only option. Examples To add a member to the MS_POLICY using the device WWN: switch:admin> secpolicyadd "MS_POLICY", "12:24:45:10:0a:67:00:40" Member(s) have been added to MS_POLICY. To add an SNMP manager to WSNMP_POLICY: switch:admin> secpolicyadd "WSNMP_POLICY", "192.168.5.21" Member(s) have been added to WSNMP_POLICY. Fabric OS 5.x command reference guide 583