HP LaserJet 3200 HP LaserJet 3200 Series Product - (English) User Guide - Page 198
X Printer, Error, Service, Canceled, Copy., Clear, Document, Feeder, Canceled Fax., Scan. - 79 service error
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Message Cause Solution 62.X PRINTER ERROR The product has experienced an internal hardware error. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize. If the message does not clear, the product will need service. 79 SERVICE (####) The product has experienced an internal hardware error. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize. If the message does not clear, the product will need service. 80 SERVICE (####) The product has experienced an internal hardware error. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize. If the message does not clear, the product will need service. 81 SERVICE (####) The product has experienced an internal hardware error. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize. If the message does not clear, the product will need service. CANCELED COPY. CLEAR DOCUMENT FEEDER The STOP/CLEAR key was pressed to Pull the document release door open, cancel the current job while pages were remove the jammed item, and close the feeding from the document feeder. The door. Then, clear the items in the cancel process will not automatically clear document feeder tray and start over. the document feeder. CANCELED FAX. The STOP/CLEAR key was pressed to CLEAR cancel the current job while pages were feeding from the document feeder tray. DOCUMENT The cancel process will not automatically FEEDER. clear the document feeder. Pull the document release door open, remove the jammed item, and close the door. Then, clear the items in the document feeder tray and start over. CANCELED SCAN. CLEAR DOCUMENT FEEDER The STOP/CLEAR key was pressed to cancel the current job while pages were feeding from the document feeder tray. The cancel process will not automatically clear the document feeder. Pull the document release door open, remove the jammed item, and close the door. Then, clear the items in the document feeder tray and start over. COMMUNICATION Fax communication error occurred ERROR between the product and the sender or receiver. Allow the product to retry sending the fax. Unplug the product telephone cord from the wall, plug in a telephone, and try making a call. Plug the product phone cord into a jack for another phone line. See "Resolving fax problems" on page 149. 196 Chapter 8 - Problem Solving and Product Maintenance EN