D-Link DGS-3426P Product Manual - Page 109

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch • Read/write or read-only level permission for the MIB objects accessible to the SNMP community. To view this window, click Administration > SNMP Manager > SNMP Community Table, as shown below. Figure 2 - 120 SNMP Community Table window The following parameters can be configured: Parameter Description Community Name View Name Access Right Type an alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. The view name must exist in the SNMP View Table. Read Only - Specifies that SNMP community members using the community string created can only read the contents of the MIBs on the Switch. Read Write - Specifies that SNMP community members using the community string created can read from, and write to the contents of the MIBs on the Switch. To implement the new settings, click Apply. To delete an entry from the SNMP Community Table, click the corresponding button under the Delete heading. SNMP Host Table Use this window to set up SNMP trap recipients. To delete an existing SNMP Host Table entry, click the corresponding under the Delete heading. To view this window, click Administration > SNMP Manager > SNMP Host Table, as shown below. button Figure 2 - 121 SNMP Host Table window 100