D-Link DGS-3426P Product Manual - Page 223

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 3 - 79 ERPS RAPS VLAN Table - Edit window The following fields can be set: Parameter Description ERPS State This is used to configure ring state of the specified ring. When both the global state and the specified ring ERPS state are enabled, the specified ring will be activated. STP and LBD should be disabled on the ring ports before the specified ring is activated. The ring cannot be enabled before the R-APS VLAN is created, and ring ports, RPL port, RPL owner, are configured. Note that these parameters cannot be changed when the ring is activated. The default ring state is Disabled. West Click to specify the port as the west ring port. To specify as a Virtual Channel, tick the check and toggle from Port to Virtual Channel. West Port If Port is set above, enter the port to be configured. East Click to specify the port as the east ring port. To specify as a Virtual Channel, tick the check and toggle from Port to Virtual Channel. East Port If Port is set above, enter the port to be configured. RPL Port Tick the check box and use the drop-down menu to select West, East, or None. West - Specify the west ring port as the RPL port. East - Specify the east ring port as the RPL port. None - This indicates that there is no RPL port on this node. By default, the node has no RPL 214