D-Link DGS-3426P Product Manual - Page 387

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch MAC Address Table This allows the Switch's dynamic MAC address forwarding table to be viewed. When the Switch learns an association between a MAC address and a port number, it makes an entry into its forwarding table. These entries are then used to forward packets through the Switch. To view this window, click Monitoring > MAC Address Table, as shown below. Figure 7 - 30 MAC Address Table window The functions are used in the MAC address table: Parameter Description VLAN Name Enter a VLAN Name for the forwarding table to be browsed by. VID (1-4094) Enter a VLAN ID for the forwarding table to be browsed by. MAC Address Enter a MAC address for the forwarding table to be browsed by. Unit - Port Select the unit of the switch in the switch stack, and a port on that switch, where to find the MAC address. Find Allows the user to move to a sector of the database corresponding to a user defined port, VLAN, or MAC address. VID The VLAN ID of the VLAN of which the port is a member. VLAN Name The VLAN Name of the VLAN of which the port is a member. MAC Address The MAC address entered into the address table. Unit - Port The unit and port to which the MAC address above corresponds. Type Describes the method which the Switch discovered the MAC address. The possible entries are Dynamic, Self, and Static. Next Click this button to view the next page of the address table. View All Entries Clicking this button will allow the user to view all entries of the address table. Clear All Entries Clicking this button will allow the user to delete all entries of the address table. 378