D-Link DGS-3426P Product Manual - Page 200

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch STP Port Settings STP can be set up on a port per port basis. In addition to setting Spanning Tree parameters for use on the switch level, the Switch allows for the configuration of groups of ports, each port-group of which will have its own spanning tree, and will require some of its own configuration settings. An STP Group will use the switch-level parameters entered above, with the addition of Port Priority and Port Cost. An STP Group spanning tree works in the same way as the switch-level spanning tree, but the root bridge concept is replaced with a root port concept. A root port is a port of the group that is elected based on port priority and port cost, to be the connection to the network for the group. Redundant links will be blocked, just as redundant links are blocked on the switch level. The STP on the switch level blocks redundant links between switches (and similar network devices). The port level STP will block redundant links within an STP Group. It is advisable to define an STP Group to correspond to a VLAN group of ports. To view this window, click L2 Features > Spanning Tree > STP Port Settings as shown as below: Figure 3 - 56 STP Port Settings window It is advisable to define an STP Group to correspond to a VLAN group of ports. The following STP Port Settings fields can be set: Parameter Description Unit Select the switch in the switch stack to be modified. 191