D-Link DGS-3426P Product Manual - Page 162

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Protocol Type Header in Hexadecimal Form IP over Ethernet 0x0800 IPX 802.3 0xFFFF IPX 802.2 0xE0E0 IPX SNAP 0x8137 IPX over Ethernet2 0x8137 decLAT 0x6004 SNA 802.2 0x0404 netBios 0xF0F0 XNS 0x0600 VINES 0x0BAD IPV6 0x86DD AppleTalk 0x809B RARP 0x8035 SNA over Ethernet2 0x80D5 Table 3 - 2 Protocol VLAN and the corresponding protocol value To achieve this goal, users must first properly set the type of protocol, along with the identifying value located in the packet header and apply it to a protocol group, which is identified by an ID number. Once the group has been created and configured, then users must add it to a port or set of ports using the Protocol VLAN Port Settings window, and configure the appropriate VLAN and priority tags for these untagged packets. When these actions are completed and saved to the switch, then the ingress and untagged packets can be appropriately dealt with and forwarded through the switch. Protocol VLAN Group Settings This window is used to begin the Protocol Group VLAN configurations. To view this window, click L2 Features > VLAN > Protocol VLAN > Protocol VLAN Group Settings, as shown below. Figure 3 - 18 Protocol VLAN Group Settings window Click the Add button to reveal the following window for the user to configure: 153