D-Link DGS-3426P Product Manual - Page 261

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 5 - 21 Access Rule Configuration window (Packet Content) To set the Access Rule for the Packet Content Mask, adjust the following parameters and click Apply. Parameter Description Profile ID This is the identifier number for this profile set. Mode Access ID (1-128) Type Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that match the access profile are not forwarded by the Switch and will be filtered. Select Mirror to specify that packets that match the access profile are mirrored to a port defined in the Port Mirroring window. Port Mirroring must be enabled and a target port must be set. Type in a unique identifier number for this access. This value can be set from 1 to 128. • Auto Assign - Ticking this check box will instruct the Switch to automatically assign an Access ID for the rule being created. Specifies the type of profile that is being created. 252