D-Link DGS-3426P Product Manual - Page 340

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Safeguard Engine Current Status flow to the CPU by dynamically allotting an even bandwidth to all traffic flows. Strict - If selected, this function will stop accepting all ARP packets not intended for the Switch, and will stop receiving all unnecessary broadcast IP packets, until the storm has subsided. The default setting is Fuzzy mode. Displays the current mode of the CPU Utilization Settings. Click Apply to implement the changes. Traffic Segmentation Traffic segmentation is used to limit traffic flow from a single port to a group of ports. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing traffic that does not increase the overhead of the Master switch CPU. To view this window, click Security > Traffic Segmentation, as shown below. Figure 6 - 64 Current Traffic Segmentation Table window Click the Setup button to open the Setup Forwarding Ports window, as shown below. 331