D-Link DGS-3426P Product Manual - Page 153
VLAN Trunk, Static VLAN window - Edit window
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 3 - 6 Static VLAN window - Edit window The following parameters can be configured or viewed: Parameter Description Unit VID VLAN Name Advertisement Select the switch in the switch stack for which to configure VLANs. Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing VLAN in the Modify window. VLANs can be identified by either the VID or the VLAN name. Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN name in the Modify window. Enabling this function will allow the Switch to send out GVRP packets to outside sources, notifying that they may join the existing VLAN. Port Settings Tag None Egress Forbidden Allows an individual port to be specified as member of a VLAN. Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will designate the port as Tagged. Allows an individual port to be specified as a non-VLAN member. Select this to specify the port as a static member of the VLAN. Egress member ports are ports that will be transmitting traffic for the VLAN. These ports can be either tagged or untagged. Select this to specify the port as not being a member of the VLAN and that the port is forbidden from becoming a member of the VLAN dynamically. Click Apply to implement the changes. To return to the Current Static VLAN Entries window, click the Show All Static VLAN Entries link. VLAN Trunk This window is used to configure VLAN trunk settings. To view this window, click L2 Features > VLAN > VLAN Trunk, as shown below. 144