D-Link DGS-3426P Product Manual - Page 390

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Trace Route The following window will aid the user in back tracing the route taken by a packet before arriving at the Switch. When initiated, the Trace Route program will display the IP addresses of the previous hops a packet takes from the Target IP Address entered in the window, until it reaches the Switch. Trace IPv4 Route To view this window, click Monitoring > Trace Route > Trace IPv4 Route, as shown below. Figure 7 - 35 Trace IPv4 Route window The following parameter can be configured: Parameter Description Target IP Address Click the radio button to enter the IP address of the computer to be traced. Domain Name Enter the domain name of the host. TTL (1-60) The time to live value of the trace route request. This is the maximum number of routers the traceroute command will cross while seeking the network path between two devices. Port (30000-64900) The virtual port number. The port number must be above 1024.The value range is from 30000 to 64900. Timeout (1-65535) Defines the time-out period while waiting for a response from the remote device. The user may choose an entry between 1 and 65535 seconds. Probe (1-9) The probe value is the number of times the Switch will send probe packets to the next hop on the intended traceroute path. The default is 1. Click Start to trace the route of a packet. 381