D-Link DGS-3426P Product Manual - Page 221

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch The following fields can be set: Parameter Description Unit Select the unit you wish to configure. From / To A consecutive group of ports that are part of the VLAN configuration starting with the selected port. CVID List The customer VLAN ID List to which the tagged packets will be added. Action Specify if you want SPVID packets to be added or replaced. SVID(1-4094) This configures the VLAN to join the Service Providers VLAN as a tagged member. Priority Select a priority for the VLAN ranging from 0-7. With 7 having the highest priority. Click Apply to create a new entry, click Find By Ports to view the current entries by ports and Delete All to remove all VLAN Translation entries. To view the VLAN translation table, click the hyperlinked Show All VLAN Translation Table. ERPS The Switch supports ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) to provide a reliable mechanism of malfunction recovery in an Ethernet ring topology network. ERPS Global Settings This window is used to enable global ERPS function on the Switch. When both the global state and the specified ring ERPS state are enabled, the specified ring will be activated. The global ERPS function cannot be enabled when any ERPS ring on the device is enabled and the integrity of any ring parameter is not available. For each ring, with the individual ring state enabled and ERPS enabled globally, the following integrity will be checked: 1. The Ring-Automatic Protection Switching (R-APS) VLAN is created. 2. The Ring port is a tagged member port of the R-APS VLAN. 3. The Ring Protection Link (RPL) port is specified if the RPL owner is enabled. The default state is Disabled. To view this window, click L2 Features > ERPS > ERPS Global Settings, as shown below. Figure 3 - 76 ERPS Global Settings window The following fields can be set: Parameter Description Global Status Enable the global ERPS function on a switch. 212