D-Link DGS-3426P Product Manual - Page 295

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 6 - 11 IMPB Entry Settings window The following fields can be set or modified: Parameter Description IPv4 Address Click the radio button and enter the IPv4 address to bind to the MAC address set below. IPv6 Address Click the radio button and enter the IPv6 address to bind to the MAC address set below. MAC Address Enter the MAC address to bind to the IP Address set above. Ports Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC Address). Tick the All Ports check box to configure this entry for all ports on the Switch. Click Add to create a new entry, click Find to search for an entry, click View All to display all entries, and click Delete All to remove all entries on the window. DHCP Snoop Entries This window is used to view DHCP Snooping entries on specific ports. To view this window, click Security > IP-MAC-Port Binding > DHCP Snoop Entries, as shown below. Figure 6 - 12 DHCP Snooping Entries window The following fields can be set: Parameter Description Unit - Port Use the pull-down menu to choose the Switch ID number of the Switch in the switch stack and the port on the Switch. Ports (e.g: 1, 5, 712) Specify the switch ports or tick the All Ports check box to select all ports. Clear Type Use the pull-down menu to select the IPv4, IPv6 or All type. 286