D-Link DGS-3426P Product Manual - Page 388

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch IGMP Snooping Group This window allows the Switch's IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. To view this window, click Monitoring > IGMP Snooping Group, as shown below. Figure 7 - 31 IGMP Snooping Group Table window The user may search the IGMP Snooping Group Table by VLAN name by entering it in the top left hand corner and clicking Find. To view all entries click View All Entry. NOTE: To configure IGMP snooping for the xStack® DGS-3400 Series switch, go to the L2 Features folder and select IGMP Snooping. Configuration and other information concerning IGMP snooping may be found in Section 7 of this manual under IGMP Snooping. IGMP Snooping Data Driven Group The dynamic IP Multicast Learning function is to forward un-registered IP multicast data packets to router ports without any clients report on the IP multicast group. To view this window, click Monitoring > IGMP Snooping Data Driven Group, as shown below. Figure 7 - 32 IGMP Snooping Data Driven Group Table window The functions are used in the MAC address table: Parameter Description VLAN Name Enter a VLAN Name to be browsed by or to be deleted. VID List Enter a list of VLAN ID to be browsed by or to be deleted. IP Address Enter a IP address to be browsed by or to be deleted. To search for IGMP snooping data driven group, click Find. To view all entries, click View All Entries. To delete an entry, enter the information and click Clear. To remove all entries, click Clear All Entries. 379