D-Link DGS-3426P Product Manual - Page 117

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch sFlow Global Settings The following window is used to globally enable the sFlow feature for the Switch. Simply use the pull-down menu and click Apply to enable or disable sFlow. This window will also display the sFlow version currently being utilized by the Switch, along with the sFlow Address that is the Switch's IP address. To view this window, click Administration > sFlow > sFlow Global Settings, as shown below. Figure 2 - 129 sFlow Global Settings window The following parameters can be configured or viewed: Parameter Description sFlow State This field allows you to globally enable or disable sFlow. sFlow Version This displays the current sFlow version. sFlow IPv4 Address This displays the sFlow IPv4 address. sFlow IPv6 Address This displays the sFlow IPv6 address. Click Apply to implement the changes. sFlow Analyzer Settings The following windows are used to configure the parameters for the remote sFlow Analyzer (collector) that will be used to gather and analyze sFlow Datagrams that originate from the Switch. Users must have the proper sFlow software set on the Analyzer in order to receive datagrams from the switch to be analyzed, and to analyze these datagrams. Users may specify up to four unique analyzers to receive datagrams, yet the virtual port used must be unique to each entry. To view this window, click Administration > sFlow > sFlow Analyzer Settings, as shown below. Figure 2 - 130 sFlow Analyzer Settings window The following fields are displayed: Parameter Description Server ID This field denotes the ID of the Analyzer Server that has been added to the sFlow settings. Up to four entries can be added with the same UDP port. 108