D-Link DGS-3426P Product Manual - Page 111
SNMP Engine ID, Trap Source Interface Settings
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Community String / SNMP V3 User Name V2 - To specify that SNMP version 2 will be used. V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Type in the community string or SNMP V3 user name as appropriate. To implement your new settings, click Apply. To return to the SNMP Host Table window, click the Show All SNMP Host Table Entries link. SNMP Engine ID The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the SNMP engine on the Switch. To view this window, click Administration > SNMP Manager > SNMP Engine ID, as shown below. Figure 2 - 124 SNMP Engine ID window To change the Engine ID, enter the new Engine ID in the space provided and click the Apply button. Trap Source Interface Settings This window is used to configure the trap source interface settings. To view this window, click Administration > Trap Source Interface Settings, as shown below. Figure 2 - 125 Trap Source Interface Settings window The following parameters can be configured: Parameter Description Interface Name Enter a name of the interface. IPv4 Address Tick the check box and enter an IPv4 address. 102